On the other hand, if you expect to spend time regularly unplugged for whatever reason, it will be best to get a better battery, ideally the one with the highest capacity available. For example, if the standard battery is a 9-cell but there are options for 12- and 15-cell batteries, go for the 15-cell if you fit this category. You should probably also go for a 2nd battery you can switch to as you’re on the go. It may be expensive but you’ll thank yourself for the investment when one
day you find all that power to really come in handy.

Another thing to remember is always buy notebook batteries from the maker of the notebook and make sure the battery is compatible with your specific model. As volatile as notebook batteries have proven to be lately, it would be foolhardy to use anything other than a same-brand battery designed with your model specifically in mind.

The last thing to remember is just general care procedures when you do purchase your laptop and its battery (or batteries). Follow any instructions and warnings that come with them (such as let the battery fully charge before use) and every once in a while unplug the laptop and drain the battery almost totally, then shut it down and let it fully recharge before using it again. This eliminates any “charge memory” that may have occurred over time with typical use and helps ensure that your battery will last longer.

1. Pays attention to the environment

You must pay attention to the environment when you use your HP laptop, usually the ideal temperature is between 10℃ to 35℃, and the environment shouldn’t too moist. Especially in the burning hot summer, must maintain the environment ventilates good, uses the notebook in the air conditioning if possible. in the computer outer covering’s scoop channel and opens the mouth to use for to ventilate. In order to guarantee that the computer can the reliable work and prevents overheated, please do not block or covers these apertures.

Please do not place your HP laptop on the leg, the bed or the sofa, these may not take, the soft thing lives in the notebook base’s radiation seal pin, causes the notebook the radiation to appear the breakdown. In order to avoid the vent is blocked. may in machine’s base from the rear end pad books and so on thing, let the notebook the bottom surface and the tabletop maintains some spaces, the notebook base will not cling on the tabletop. This will have more quantity of heats to send out from the base.

2. HP Laptop battery Batteries do not last forever, even Lithium Ion batteries.

HP Li-ion batteries degrade or deteriorate continuously. Even when not in use they will deteriorate, at a smaller pace. The battery loses about 15% of its capacity every 100 cycles. A cycle is a dischargecharge. So, after about 1~2 years, the battery will end up with very low capacity and this renders the battery unusable. As soon as the battery leaves the production line it is likely to start losing it’s capacity.

Do not use a laptop or a HP laptop battery from extreme temperatures. Let them reach room temperature before use.

Do not use a broken or damaged laptop battery, prevent serious damage to property and person.

Clean the metal contacts on the laptop battery, with rubbing alcohol. Clean contacts ensure a good connection.

Fully discharge and recharge your HP notebook battery about once every 3 months, even Lithium Ion batteries. This is simply because, the smart electronics gets a bit confused as to capacity. (Not very smart….).

If you have a HP replacement battery, use it in rotation with the HP original battery.

Remove all USB devices, PCMCIA cards and any others that are not being used. Whilst connected they draw a certain amount of power from the battery. Some require switching off by the software or operating system even if they are unplugged.

3. Adjustment HP notebook power source establishment

In Windows under the XP operating system, enters [starts] the menu, the choice [control panel], if you classify the view, enters [performance and maintenance], otherwise enters [power source option]. Appears the dialog box may let you establish the notebook the hard disk and the screen, in period of time do not use under the condition closes. May carry on the similar power source option similarly in the early Windows edition with the control panel the establishment.

4. Clean your HP laptop’s vent The notebook built-in ventilator has a vent. after use a time, the vent will be agglomerating the dust, these dusts can stop up the vent.

5. Promotion your HP notebook BIOS Sometimes, overheat means that the computer ventilator’s controller needs the BIOS promotion.

New edition’s BIOS may cause the notebook ventilator to work effective. If you thought that your notebook becomes more and more hot, you might as well arrive in the website to examine whether to have new BIOS to provide.

• Use the notebook’s power management system – In Microsoft Windows the “Power Options” power management application can be found inside the Control Panel. In the Power Options Properties tab select the “Portable/Laptop” power scheme. Many notebook manufactories also provide their own custom power management applications, which help to optimize power usage and extend battery time.

• Turn down the display brightness – You can lower the LCD brightness level to use less energy. In fact a lower brightness level also strains the eyes less and causes less fatigue.

• Close any unused applications – Applications are a burden on the system and require energy to run. Closing any unused applications will reduce that burden and any energy consumption down the line.

• Remove any unused PC Cards or USB devices from your notebook – These devices require energy even when they sit idle, so removing them can help to extend your notebook’s battery time.

• Disable Wireless LAN or Bluetooth network adapter when not in use – Ditto for the Wireless LAN or Bluetooth network adapters.

• Increase system memory – Your computer stores data for use by the CPU in system memory or as virtual memory in the hard drive. Increasing system memory helps to reduce the system’s reliance on the hard drive, which uses more
energy than system memory.

• Reduce unnecessary optical drive operation/activity – Avoid activities that require your optical drive to operate constantly, such as listening to CDs.

• Avoid graphics intensive applications – The notebook system will run in a high performance settings when using these applications, causing the battery to run down at a very quick rate.

Laptop Battery Maintenance Tips

Almost all notebooks today utilize rechargeable Lithium-ion (Li-Ion) batteries. Lithium Ion provides many benefits over earlier Nickel-Metal Hydride (NiMH) or Nickel Cadmium (NiCd) Batteries, including less mass, better performance, and insusceptibility to the so-called “memory effect”. Despite these benefits you can maximize your battery’s lifespan by following these maintenance tips:

• New batteries must be fully charged before use – To put your battery in optimum condition for long-term usage, please fully charge the battery before its first use. Very importantly as well, for the first 3 charge cycles, always fully charge before use and fully discharge before recharging.

• Calibrate the battery every few months – Almost all notebook batteries are created with an internal microprocessor, which provides an estimate of battery conditions such as number of charges, discharges, full charge capacity and cycle charge count. The full charge capacity will become a little inaccurate after a few months and calibrating it can help restore the battery’s performance.

• Some notebooks provide calibration tools in the BIOS or a Windows application. If your notebook provides either of them, you can use them.

1. Defrag regularly – The faster your hard drive does its work – less demand you are going to put on the hard drive and your battery. Make your hard drive as efficient as possible by defragging it regularly. (but not while it’s on battery of course!) Mac OSX is better built to handle fragmentation so it may not be very applicable for Apple systems.

2. Dim your screen – Most laptops come with the ability to dim your laptop screen. Some even come with ways to modify CPU and cooling performance. Cut them down to the lowest level you can tolerate to squeeze out some extra battery juice.

3. Cut down on programs running in the background. Itunes, Desktop Search, etc. All these add to the CPU load and cut down battery life. Shut down everything that isn’t crucial when you’re on battery.

4. Cut down external devices – USB devices (including your mouse) & WiFi drain down your laptop battery. Remove or shut them down when not in use. It goes without saying that charging other devices (like your iPod) with your laptop when on battery is a surefire way of quickly wiping out the charge on your laptop battery.

5. Add more RAM – This will allow you to process more with the memory your laptop has, rather than relying on virtual memory. Virtual memory results in hard drive use, and is much less power efficient. Note that adding more RAM will consume more energy, so this is most applicable if you do need to run memory intensive programs which actually require heavy usage of virtual memory.

6. Run off a hard drive rather than CD/DVD – As power consuming as hard drives are, CD and DVD drives are worse. Even having one in the drive can be power consuming. They spin, taking power, even when they?re not actively being used. Wherever possible, try to run on virtual drives using programs like Alcohol 120% rather than optical ones.

7. Keep the battery contacts clean – Clean your battery’s metal contacts every couple of months with a cloth moistened with rubbing alcohol. This keeps the transfer of power from your battery more efficient.

8. Take care of your battery – Exercise the Battery. Do not leave a charged battery dormant for long periods of time. Once charged, you should at least use the battery
at least once every two to three weeks. Also, do not let a Li-On battery completely discharge. (Discharing is only for older batteries with memory effects)

9. Hibernate not standby – Although placing a laptop in standby mode saves some power and you can instantly resume where you left off, it doesn’t save anywhere as much power as the hibernate function does. Hibernating a PC will actually save your PC’s state as it is, and completely shut itself down.

10. Keep operating temperature down – Your laptop operates more efficiently when it’s cooler. Clean out your air vents with a cloth or keyboard cleaner, or refer to some extra tips by LapTopMag.com.

11. Set up and optimize your power options – Go to ‘Power Options’ in your windows control panel and set it up so that power usage is optimized (Select the ‘max battery’ for maximum effect).

12. Don’t multitask – Do one thing at a time when you’re on battery. Rather than working on a spreadsheet, letting your email client run in the background and listening to your latest set of MP3’s, set your mind to one thing only. If you don’t you’ll only drain out your batteries before anything gets completed!

13. Go easy on the PC demands – The more you demand from your PC. Passive activities like email and word processing consume much less power than gaming or playing a DVD. If you’ve got a single battery charge – pick your priorities wisely.

14. Get yourself a more efficient laptop – Laptops are getting more and more efficient in nature to the point where some manufacturers are talking about all day long batteries. Picking up a newer more efficient laptop to replace an aging one is usually a quick fix.

15. Prevent the Memory Effect – If you’re using a very old laptop, you’ll want to prevent the ‘memory effect’ – Keep the battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries (which most laptops have) which do not suffer from the memory effect.

Bonus Tip #1: Turn off the autosave function. MS-Word’s and Excel’s autosave functions are great but because they keep saving regular intervals, they work your hard driver harder than it may have to. If you plan to do this, you may want to turn it back on as the battery runs low. While it saves battery life in the beginning, you will want to make sure your work is saved when your battery dies.

Bonus Tip #2: Lower the graphics use. You can do this by changing the screen resolution and shutting off fancy graphic drivers. Graphics cards (video cards) use as much or more power today as hard disks.

Manufacturers of battery test equipment are responding by introducing software packages that run on a PC. Many new systems enable operating the battery analyzers through a PC. Such products bring battery maintenance within reach of the untrained operator.

Cadex Batteryshop┢ is a system that integrates with the Cadex 7000 Series battery analyzers. Although the analyzers are stand-alone units that can think on their own, the software overrides the analyzer to adjust the settings, and stores the test results obtained from the batteries. Figure 12-2 illustrates such a battery maintenance system.

Here are examples of how a computer-assisted battery testing system can simplify operation. To service a battery with Cadex Batterystore, for example, the user selects the battery model from the database, clicks the mouse, and the analyzer is automatically configured to the correct battery parameters. Programming the analyzer by scanning the bar code identifying the battery’s model number is also possible.

But the HP li-ion battery capacity also weakens. And the reason is quite complex, but have certain relations with user’s use custom, In the lithium ion battery use process, the solid material will deposit unceasingly on the electrode, these solid material will possibly be chemical material or electrolyte or impurities which will be unable to decompose the nature, they will adhere to stick cohere unceasingly on the electrode will cause the effective electrolyte directly the reduction, available made the circulation the electrolyte to tail off,battery’s capacity also reduced, and the using time is shorter and shorter.

The items blew is incorrect when you ues HP lithium battery.

The lithium battery needs the depth electric discharge. Very obviously, regarding had the memory effect nickel hydrogen battery, will fill completely puts will raise the use efficiency. But HP lithium battery and the non-memory effect, may along with
use along with sufficiently, does not affect its capacity.

When uses the external power supply, plug off the HP notebook battery. Proposed that this viewpoint’s basis will be the frequent charging and discharging will damage the notebook battery, but have never realized such will make the gain does not equal the loss. At the same time, the lithium battery has the intelligence protection circuit now, when generally the electric quantity drops above 5%, only will then start to charge; on the other hand, frequently inserts pulls out the battery, possibly creates the connection bad contact, instead damages the battery and the notebook; Finally, the notebook battery also plays UPS the role, once the sudden power failure, the battery may guarantee that the computer continues to work.

The first charge takes for 12 hours. In fact, the majority HP notebook batteries have the charging protection circuit now, so long as after filling the electricity, battery on cut-off and alternating current relation.

When you don’t use your laptop battery for a long time, make sure the lithium battery has empty or fully. Actually, either empty or fully is not correct, if your long time does not use the lithium battery, should when its electric quantity be 40~60% preserves, under this condition, the battery discharge is relatively slow, but long time preservation. In addition, do not use the battery in the frozen or hot condition. Avoids the above some erroneous zones, is also helpful for your the battery life, certainly, most essential is charge and discharge times. We also provide you a battery real-time software to help you mange your laptop battery.

2. Stay out of extreme temperatures. The technology that powers you battery isn’t terribly complicated. But it’s important to understand a little bit about the chemistry behind batteries, and how that can affect your work. Specifically, temperatures can affect the performance of your battery. It’s best to use (and especially charge) your batteries at room temperatures. Extreme conditions can drain your battery quickly. Also, avoid partial charges and use the battery until it is dead. Battery experts liken partial charges — and discharges — to eating a cup of lard every day. It significantly shortens your battery’s life. Considering that a lithium-ion battery can explode if it’s improperly used, it could also shorten your life.

3. Let your laptop do the saving. Not every computing device handles a power source in the same way. Some of the more sophisticated laptops, which are designed with business travelers in mind, are misers when it comes to using power. And that’s a good thing — if you can remember to take advantage of it. “Most users make the mistake of simply not choosing to use a product’s built-in ability to conserve battery life,” says Dan Coffman, a senior product manager for PC manufacturer ViewSonic. How do you harness your PC’s built-in ability to save? Consult your user manual. Often, calibrating your laptop is as easy as double-clicking on the battery icon in the toolbar.

4. Always, always carry a spare device that uses batteries. How obvious is that? Well, if you’re trying to keep under the onerous new airline weight-limits, it isn’t. But as Rick Thompson, director of engineering at Valence Technology in Austin, Texas, observes, “the availability of ‘free’ power outside of your hotel room is not predictable.” That’s a nice way of saying it. In fact, I sometimes think airport terminals, car-rental facilities and hotels try to hide the power outlets from us to keep us from accessing their free power. Thompson recommends a system that can simultaneously charge a second portable device such as a cell phone or PDA, allowing you to multitask your battery operations.

Your new laptop battery comes in a discharged condition and must be charged before use (refer to your computer manual for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require two to three charge/discharge cycles before achieving maximum capacity.

When charging the laptop battery for the first time your computer may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Simply remove the battery from the computer and repeat the charging procedure.

It is important to condition (fully discharge and then fully charge) the laptop battery every two to three weeks. Failure to do so may significantly shorten the battery’s life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run your device under the battery’s power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in your user’s manual.

If the laptop battery will not be in use for a month or longer, it is recommended that it be removed from the device and stored in a cool, dry, clean place.

It is normal for a laptop battery to become warm during charging and discharging.

A charged laptop battery will eventually lose its charge if unused. It may therefore be necessary to recharge the battery after a storage period.

The milliamp-hour (mAH) rating of the laptop battery dot org batteries will often be higher than the one on your original battery. A higher mAH rating is indicative of a longer lasting (higher capacity) battery and will not cause any incompatibilities. An laptop battery dot org battery will, in most cases, outperform the original by 30% to 50%.

Actual battery run-time depends upon the power demands made by the equipment. In the case of notebook computers, the use of the monitor, the hard drive and other peripherals results in an additional drain upon the battery, effectively reducing the battery’s run-time. The total run-time of the battery is also heavily dependent upon the design of the equipment. To ensure
maximum performance of the battery, optimize your computer’s power management features. Refer to your computer manual for further instructions.

2. How can i maximize my laptop battery performance?

There are several steps you can take to insure that you get maximum performance from your laptop battery:

Breaking In New Batteries – new batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity.

Preventing the Memory Effect – Keep your battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.

Keep Your Batteries Clean – It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable device.

Exercise Your Battery – Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.

Battery Storage – If you don’t plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, NiMH and Li-ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months.

For Notebook Users – To get maximum performance from your battery, fully optimize the notebook’s power management features prior to use. Power management is a trade off: better power conservation in exchange for lesser computer performance. The power management system conserves battery power by setting the processor to run at a slower speed, dimming the screen, spinning down the hard drive when it’s not in use and causing the machine to go into sleep mode when inactive. Your notebook user’s guide will provide information relating to specific power management features.